checking in all the old panacean stuff

puttysrc/SERCFG.C

@@ -0,0 +1,181 @@
+/*
+ * sercfg.c - the serial-port specific parts of the PuTTY
+ * configuration box. Centralised as cross-platform code because
+ * more than one platform will want to use it, but not part of the
+ * main configuration. The expectation is that each platform's
+ * local config function will call out to ser_setup_config_box() if
+ * it needs to set up the standard serial stuff. (Of course, it can
+ * then apply local tweaks after ser_setup_config_box() returns, if
+ * it needs to.)
+ */
+
+#include <assert.h>
+#include <stdlib.h>
+
+#include "putty.h"
+#include "dialog.h"
+#include "storage.h"
+
+static void serial_parity_handler(union control *ctrl, void *dlg,
+				  void *data, int event)
+{
+    static const struct {
+	const char *name;
+	int val;
+    } parities[] = {
+	{"None", SER_PAR_NONE},
+	{"Odd", SER_PAR_ODD},
+	{"Even", SER_PAR_EVEN},
+	{"Mark", SER_PAR_MARK},
+	{"Space", SER_PAR_SPACE},
+    };
+    int mask = ctrl->listbox.context.i;
+    int i, j;
+    Config *cfg = (Config *)data;
+
+    if (event == EVENT_REFRESH) {
+	dlg_update_start(ctrl, dlg);
+	dlg_listbox_clear(ctrl, dlg);
+	for (i = 0; i < lenof(parities); i++)  {
+	    if (mask & (1 << i))
+		dlg_listbox_addwithid(ctrl, dlg, parities[i].name,
+				      parities[i].val);
+	}
+	for (i = j = 0; i < lenof(parities); i++) {
+	    if (cfg->serparity == parities[i].val)
+		dlg_listbox_select(ctrl, dlg, j);
+	    if (mask & (1 << i))
+		j++;
+	}
+	dlg_update_done(ctrl, dlg);
+    } else if (event == EVENT_SELCHANGE) {
+	int i = dlg_listbox_index(ctrl, dlg);
+	if (i < 0)
+	    i = SER_PAR_NONE;
+	else
+	    i = dlg_listbox_getid(ctrl, dlg, i);
+	cfg->serparity = i;
+    }
+}
+
+static void serial_flow_handler(union control *ctrl, void *dlg,
+				void *data, int event)
+{
+    static const struct {
+	const char *name;
+	int val;
+    } flows[] = {
+	{"None", SER_FLOW_NONE},
+	{"XON/XOFF", SER_FLOW_XONXOFF},
+	{"RTS/CTS", SER_FLOW_RTSCTS},
+	{"DSR/DTR", SER_FLOW_DSRDTR},
+    };
+    int mask = ctrl->listbox.context.i;
+    int i, j;
+    Config *cfg = (Config *)data;
+
+    if (event == EVENT_REFRESH) {
+	dlg_update_start(ctrl, dlg);
+	dlg_listbox_clear(ctrl, dlg);
+	for (i = 0; i < lenof(flows); i++)  {
+	    if (mask & (1 << i))
+		dlg_listbox_addwithid(ctrl, dlg, flows[i].name, flows[i].val);
+	}
+	for (i = j = 0; i < lenof(flows); i++) {
+	    if (cfg->serflow == flows[i].val)
+		dlg_listbox_select(ctrl, dlg, j);
+	    if (mask & (1 << i))
+		j++;
+	}
+	dlg_update_done(ctrl, dlg);
+    } else if (event == EVENT_SELCHANGE) {
+	int i = dlg_listbox_index(ctrl, dlg);
+	if (i < 0)
+	    i = SER_PAR_NONE;
+	else
+	    i = dlg_listbox_getid(ctrl, dlg, i);
+	cfg->serflow = i;
+    }
+}
+
+void ser_setup_config_box(struct controlbox *b, int midsession,
+			  int parity_mask, int flow_mask)
+{
+    struct controlset *s;
+    union control *c;
+
+    if (!midsession) {
+	int i;
+	extern void config_protocolbuttons_handler(union control *, void *,
+						   void *, int);
+
+	/*
+	 * Add the serial back end to the protocols list at the
+	 * top of the config box.
+	 */
+	s = ctrl_getset(b, "Session", "hostport",
+			"Specify the destination you want to connect to");
+
+        for (i = 0; i < s->ncontrols; i++) {
+            c = s->ctrls[i];
+	    if (c->generic.type == CTRL_RADIO &&
+		c->generic.handler == config_protocolbuttons_handler) {
+		c->radio.nbuttons++;
+		c->radio.ncolumns++;
+		c->radio.buttons =
+		    sresize(c->radio.buttons, c->radio.nbuttons, char *);
+		c->radio.buttons[c->radio.nbuttons-1] =
+		    dupstr("Serial");
+		c->radio.buttondata =
+		    sresize(c->radio.buttondata, c->radio.nbuttons, intorptr);
+		c->radio.buttondata[c->radio.nbuttons-1] = I(PROT_SERIAL);
+		if (c->radio.shortcuts) {
+		    c->radio.shortcuts =
+			sresize(c->radio.shortcuts, c->radio.nbuttons, char);
+		    c->radio.shortcuts[c->radio.nbuttons-1] = NO_SHORTCUT;
+		}
+	    }
+	}
+    }
+
+    /*
+     * Entirely new Connection/Serial panel for serial port
+     * configuration.
+     */
+    ctrl_settitle(b, "Connection/Serial",
+		  "Options controlling local serial lines");
+
+    if (!midsession) {
+	/*
+	 * We don't permit switching to a different serial port in
+	 * midflight, although we do allow all other
+	 * reconfiguration.
+	 */
+	s = ctrl_getset(b, "Connection/Serial", "serline",
+			"Select a serial line");
+	ctrl_editbox(s, "Serial line to connect to", 'l', 40,
+		     HELPCTX(serial_line),
+		     dlg_stdeditbox_handler, I(offsetof(Config,serline)),
+		     I(sizeof(((Config *)0)->serline)));
+    }
+
+    s = ctrl_getset(b, "Connection/Serial", "sercfg", "Configure the serial line");
+    ctrl_editbox(s, "Speed (baud)", 's', 40,
+		 HELPCTX(serial_speed),
+		 dlg_stdeditbox_handler, I(offsetof(Config,serspeed)), I(-1));
+    ctrl_editbox(s, "Data bits", 'b', 40,
+		 HELPCTX(serial_databits),
+		 dlg_stdeditbox_handler,I(offsetof(Config,serdatabits)),I(-1));
+    /*
+     * Stop bits come in units of one half.
+     */
+    ctrl_editbox(s, "Stop bits", 't', 40,
+		 HELPCTX(serial_stopbits),
+		 dlg_stdeditbox_handler,I(offsetof(Config,serstopbits)),I(-2));
+    ctrl_droplist(s, "Parity", 'p', 40,
+		  HELPCTX(serial_parity),
+		  serial_parity_handler, I(parity_mask));
+    ctrl_droplist(s, "Flow control", 'f', 40,
+		  HELPCTX(serial_flow),
+		  serial_flow_handler, I(flow_mask));
+}